RadioLink RC8X Instruction Manual page 15

③ The battery voltage of transmitter.
④ Servo operation from CH1 to CH8. Real-time bar-graph display to demonstrate exactly
what commands the transmitter is sending to the
servos.
⑤ Mixing function. The background color of
functional block will turn to blue if the mixing function
corresponding turn on while the background color of
functional block will turn to grey if the mixing function
corresponding turn off.
⑥ T1 ： Total timer. It is used to record the total
uptime of the transmitter. Turn off the transmitter will
not affect time accumulation.
T2 ： Click to time. Click the T2 timer functional
block to start to time, stop to time or reset. Click once
to start to time, click twice to stop to time, click thrice
to reset. The timer set steps can follow:
⑦ Telemetry.
RX：the current input voltage of receiver.
EXT：the current input voltage of cars or boat.
RSSI ： the receiver signal strength, "NULL"
indicate loss of signal or the transmitter and the receiver failed to bind. The RSSI is 0 to 30dBm is
normal when the transmitter is apart about 60 centimeters from the receiver, the signal is better
the RSSI data is closer to 0. The RSSI test steps can follow:
⑧ Button name and its function name and state. The function and value represented by
DT1/DT2/DT3/DT4/DL1 can be checked on the home page.
⑨ Into setting menu. Into all the parameter setting menu by press this button.
1.2.9.3 Language Select
The menu interface is available in multiple languages,
including Simplified Chinese, Traditional Chinese, English,
Japanese, Spanish, German and Russian. The menu
language of RC8X is English by default, language can be
changed in Information Menu.
Setting Steps: turn on your RC8X, click the button
at the left bottom of RC8X into System menu, click
at the left of RC8X into Information menu, , click the
blue select box below the word Language, and then
choose the language you want.
Back: click the button
button to return to the previous menu.
2.3.4 Timer
or short press the power
14
RadioLink Electronic Limited
1.3.7 RSSI Testing
www.radiolink.com