RadioLink RC8X Instruction Manual page 36

of the file name will increase by one for each additional picture.
Screenshots preview: it is not supported to preview screenshots directly in the transmitter. If
you want to preview the screenshots, you can connect the transmitter and the computer with a
Type-C USB cable, and then preview the screenshots on the computer. Or pull out the SD card
and insert it into the card reader, and then insert the card reader into the USB port of the
computer to preview the screenshots. (As shown on the right)
Screenshots preview steps:
1) connect the transmitter and the computer with a Type-C USB cable, and then press the
button PS1 and press the power button at the same time to turn on the transmitter, a tooltip will
pop out, if the yellow select box at USB MODE, press the power button to make the USB connect.
A U disk will pop out when connecting success.
2) click the "screenshot" folder in the U disk to preview the screenshots
3) click the picture you want to preview
Attention:
a. Do not pull or insert the SD card during taking screenshots.
b. It is not supported to rename the screenshots or delete the screenshots directly in the
transmitter.
c. The charging USB cable that without data transmission function cannot be used to make
your transmitter and the computer connects success, please use a USB data cable to connect.
d. All files in the SD card only support English, not other languages. If you rename it to
another language, the file name will be garbled when you going to preview the screenshots files
in the transmitter.
e. If the SD card is pulled out and the contents have been modified, you need to insert the
35
RadioLink Electronic Limited
www.radiolink.com