RadioLink RC8X Instruction Manual page 52

RadioLink Electronic Limited
www.radiolink.com
Attention:
Throttle servo (ESC) operation is delayed so that the drive wheels will not spin even if the throttle
trigger is operated more than necessary. This delay function is not performed when the throttle
trigger is returned and at brake operation.
Mode：All point, High-Low point, Three-point can be selected.
All point mode High-Low point mode Three-point mode
All point：A delay is set over the entire throttle range.
Turn: the initial value is 100, 1 to 100 can be selected, if the value is
100, it means there is no delay.
Servo operation is delayed.
Return: the initial value is 100, 1 to 100 can be selected, if the value is 100, it means there is no
delay.
Servo operation is delayed.
High-Low point：A delay can be set in 2 ranges with Point 1 as the boundary.
Turn ： "Low" and "High" turn direction delay adjustment, the initial value of High or Low turn
speed is 100, 1 to 100 can be selected, if the value is 100, it means there is no delay.
Servo operation is delayed.
Return："Low" and "High" return direction delay adjustment, the
initial value of High or Low return speed is 100, 1 to 100 can be
selected, if the value is 100, it means there is no delay.
Servo operation is delayed.
51