Table of Contents
Advertisement
6.2
a
ccessories
CONFIGURATION KIT
KIT PC USB / RS485 o TTL
80999D_MHW_GFW 400-600A_07-2020_ENG
Configuration/supervision kit for GFW by means of PC with USB (Windows environment).
Lets you read or write all of the parameters of a single GFW
A single software for all models
• Easy and rapid configuration
• Saving and management of parameter recipes
• On-line trend and saving of historical data
Component Kit:
- Connection cable PC USB <----> GFW RS485 port
- Serial line converter
- CD SW GF Express installation
ORDERING CODE
GF_eXK-2-0-0....................................Cod. F049095
The human/machine interface (HMI) is simple, intuitive, and very practical thanks to the optional
GFW – OP programming keyboard.
Permits reading and/or writing of all pre-GFW control parameters.
Connected with 9-pin D-SUB connector and housed in the front panel of the GFW-M by means
of a magnetic plate.
• Alphameric display: 5 lines x 21 characters.
• Keys to display variable and set parameters.
• Magnetic housing
ORDERING CODE
GFW - OP....................................Cod. F068952
Kit for 400/500/600A wiring with stripped wires (with this kit, wires with crimped terminal tube are
not required), consisting of:
2 ILSCO lugs
2 M12x25 bolts
2 Belleville washers
2 IP20 protection grids for GFW400/600
ORDERING CODE
ILSCO Lug Kit...................................Cod. F067432
51
Advertisement
Table of Contents
