Accessories - gefran GEFLEX GFX-M1 Series Operating Instructions And Warnings

KIT WINSTRUM
GFX-OP
FUSES
KIT TO ADAPT GTS MODULES TO GEFLEX BASE
Note: See the Geflex catalog for more accessories.
80331F_MHW_GFX-25/120A_05-2014_ENG

14.1 Accessories

Software for management / configuration of Geflex units.
The main parameters of all Geflex models can be varied with a simple, intuitive interface.
ORDER CODE
Winstrum software on CD, RS232/485 converter complete
with cables to connect the PC and the Geflex .......................................... WSK - 1 - 1 - 0
Operator terminal for field configuration of the entire Geflex range
Two types of terminals are available:
- for installation on the Geflex heatsink or on DIN guide
- for installation on the faceplate
ORDER CODE
Programming terminal for Geflex (installation on DIN guide or on heatsink),
complete with connection cable to Geflex (L = 0.2 m) .......................................GFX-OP-D
Note: see cable section for other cable lengths
Programming terminal for Geflex (installation on faceplate)..............................GFX-OP-P
Note: see cable section for connection cable
Kit consists of:
power supply, connection cable PC <--> GFX-DP-D (L = 2 m),
power adapter for the Geflex .............................................................................GFX-OP-K
ORDER CODE
GFX 25 ........... FUS-025 (10x38mm)
GFX 40 ............ FUS-040 (14x51mm)
GFX 60 ............ FUS-080 (22x58mm)
GFX 90 .......... FUS-100 (22x58mm)
GFX 120 ......... FUS-125N (100x51x30mm)
non-extractable
Kit consisting of set of reeds with nickel-plated copper contact, pad-printed cover with
hook cursor.
Permits installation of GTS series solid state power relays on the Geflex base.
ORDER CODE
Kit to insert GTS-25A on Geflex BASE Master/Slave 25-40 ............................... CGK-25
Kit to insert GTS-40A on Geflex BASE Master/Slave 25-40 ............................... CGK-40
Kit to insert GTS-60A on Geflex BASE Master/Slave 60-120 ............................. CGK-60
Kit to insert GTS-75A on Geflex BASE Master/Slave 60-120 ............................. CGK-75
Kit to insert GTS-90A on Geflex BASE Master/Slave 60-120 ............................. CGK-90
Kit to insert GTS-90A on Geflex BASE Master/Slave 60-120 ........................... CGK-120
FUSE HOLDERS
ORDER CODE
PF - 10x38 ...... (for FUS-025)
PF - 14x51 ....... (for FUS-040)
PF - 22x58 ....... (for FUS-080, FUS-100)
PF - DIN .......... (for FUS-125N)
21