Table of Contents
Advertisement
The Site Plan Drawing
Operator Area*
1000 mm
(39.4 in.)
*For example purposes only. The operator does not have to be positioned in front of the system.
Chapter 1
A system plan drawing should be used for all aspects of the site preparation.
A complete drawing should detail power availability, LAN availability and
system placement with respect to other equipment. It can also serve to verify
physical access for operators and maintenance personnel.
Figure 1-2 shows a typical layout for a typical Agilent E22xxA Automotive
Functional Test System. If the operator will be positioned in front of the
system, allow 1 meter (3.3 feet) of space in front of the system. You should
allow 1 meter (3.3 feet) of space behind the system for service. The 0.75
meter rack is designed to fit under many production lines.
Rack height is 740 mm (29.1 in.)
Agilent Technologies
Automotive Functional
(includes Express
Figure 1-2. Typical test system layout (overhead view)
Test System
(Top View)
850 mm
Connect)
(33.46 in.)
Instrument and Service
Access Area
1000 mm
(39.4 in.)
Site Preparation
17
Advertisement
Table of Contents
