24 Test System Installation
Power Cord Wire Colors:
Blue = Neutral
Brown - Line
Green/Yellow = Ground
Figure 2-3. Unterminated Power Cord (not supplied with all systems)
Note
The power cord and wall outlet connector selected must conform to the
requirements of the country where the system will be installed.All electrical
connections must be done by a qualified electrician
4. Determine the power plug type needed and, if necessary, the power
cord needed. Make the appropriate connections between the cord and
wall outlet connector and the Power Connector.
5. Set the power switch on the top front of the rack to the off position.
Connect the power cord to the Filtered Power Strip located in the
Strain Relief
Typical Power Plug
(not supplied)
Chapter 2