Omron SYSMAC CS Series Operation Manual page 98

CS1W-PTR01 Power Transducer Input Unit
Features
Model Information
Unit classification
CS-series Special I/O Unit CS1W-PTR01
• Up to eight inputs of 0 to 1 mA or –1 to 1 mA from a power transducer can
be separately connected.
• Scaling values are sent to the CPU Unit in four digits hexadecimal.
• The inrush input limit function temporarily limits the process value input to
a given set value when it increases from a low value (2%), in order to pre-
vent process values from being jumped up by an inrush current when the
motor is started up, and so on. (This function is available for inputs of 0 to
1 mA only.)
• Two values for each process value alarm input.
• ON-delay timer for process value alarm.
• Mean value processing (for four values).
• Zero/span adjustment capability during operation.
Model number Inputs
8 max.
Input types
Either of the following can be selected separately:
0 to 1 mA, or –1 to 1 mA.
Section 2-6
85