Omron SYSMAC CS Series Operation Manual page 55

CS1W-PTS02 Isolated-type Resistance Thermometer Input Unit
System Configuration
Features
Model Information
Unit classification
CS-series Special I/O Unit CS1W-PTS02
42
Resistance thermometer inputs
(Pt100 or JPt100)
• Up to four platinum resistance thermometers can be connected for each
Unit (with four separate settings for temperature sensors and input
ranges).
• Pt100 (JIS, IEC) or JPt100 can be selected.
• Temperature sensor values are transmitted to the CPU Unit in four digits
hexadecimal.
• Variable input range setting.
• Four values for each process value alarm input.
• ON-delay timer for process value alarm.
• Mean value processing.
• Rate-of-change calculation.
• Two values for each rate-of-change alarm input.
• Zero/span adjustment capability during operation.
• Disconnection detection.
• Maximum or minimum process value can be specified for when a discon-
nection is detected.
Model number Inputs
4 max.
Temperature sensor types
Platinum resistance thermometer Pt100 (JIS, IEC) or
JPt100.
Section 2-2
CS1W-PTS02