Device Configuration - Omron sysmac EtherNet/IP NJ Series Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedures in this guide are as
follows:
Personal computer
(Sysmac Studio installed,
OS: Windows 7)
USB cable
Power supply for the system and input modules
Manufacturer
NJ-series CPU Unit
OMRON
(Built-in EtherCAT port)
OMRON Power Supply Unit
OMRON Sysmac Studio
- Personal computer
(OS: Windows 7)
USB cable
-
(USB 2.0 type B connector)
OMRON Ethernet cable (with industrial
Ethernet connector)
Weidmüller EtherCAT Fieldbus Coupler
Weidmüller I/O Modules
Weidmüller ESI file (for EtherCAT
Fieldbus Coupler)
Weidmüller ESI file (for I/O Modules)
- Power supply for the system
and input modules (24 VDC)
Power supply for output
-
modules (24 VDC)
Precautions for Correct Use
Prepare the ESI files listed above beforehand.
To obtain the ESI files, contact Weidmüller Interface GmbH & Co. KG.
5．Applicable Devices and Device Configuration
NJ501-1500
(Built-in EtherCAT port)
Power supply for output modules
Name
NJ501-1500
NJ-PA3001
SYSMAC-SE2[][][]
-
-
XS5W-T421-[]M[]-K
UR20-FBC-EC
UR20-8DI-N-3W
UR20-4DO-PN-2A
UR20-16DI-P
UR20-4DI-P-TS
UR20-16DO-P
Weidmueller_UR20_FBC.xml
Weidmueller_UR20_IO.xml
-
-
u-remote
Ethernet
cable
UR20-FBC-EC
├UR20-8DI-N-3W
├UR20-4DO-PN-2A
├UR20-16DI-P
├UR20-4DI-P-TS
└UR20-16DO-P
Model
Ver.1.14
Ver.1.18
Rev.0x00000001
Version
6