Omron sysmac EtherNet/IP NJ Series Connection Manual page 31

4
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
5
Check that "0 Errors" and "0
Warnings" are displayed on the
Build Tab Page.
6
Select Online from the
Controller Menu.
When an online connection is
established, a yellow bar is
displayed under the toolbar.
7
Select Synchronize from the
Controller Menu.
8
The Synchronization Dialog Box
is displayed.
Check that the data to transfer
(NJ501 shown on the right) is
selected.
Click Transfer To Controller.
*After executing "Transfer To
Controller", the Sysmac Studio
data is transferred to
Controller, and the data is
synchronized.
7．EtherCAT Connection Procedure
28