Omron sysmac EtherNet/IP NJ Series Connection Manual page 26

4
Check that 1 is displayed in the
Set value Column. Click Write.
5
The Slave Node Address Writing
Dialog Box is displayed.
Check the contents and click
Write.
A screen is displayed stating
"Slave Node Address Writing is
being executed".
The dialog box on the right is
displayed. Check the contents
and click Close.
6
Power cycle the slave unit.
7
Right-click Master on the
EtherCAT Tab Page of the Edit
Pane, and select Compare and
Merge with Actual Network
Configuration.
A screen is displayed stating
"Get information is being
executed".
7．EtherCAT Connection Procedure
23