Overview - Omron sysmac EtherNet/IP NJ Series Connection Manual

4．Overview

4. Overview

This guide describes procedures for connecting a Weidmüller Remote I/O System u-remote
IP20 (hereinafter referred to as the "u-remote") to an OMRON NJ/NX-series Machine
Automation Controller (hereinafter referred to as the "Controller") via EtherCAT and for
checking their communication status.
Refer to Section 6. EtherCAT Settings and Section 7. EtherCAT Connection Procedure to
understand setting methods and key points to perform PDO Communications via EtherCAT.
4