Installing The Aileron Servos - Seagull Models Focke-Wulf Fw 190 Assembly Manual

Focke- Wulf FW190

INSTALLING THE AILERON SERVOS

1.
2.
Minimum servo spec.
Torque : 6.0V: 157.00 oz-in (11.31 kg-cm)
7.4V: 179.00 oz-in (12.89 kg-cm)
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
Place the servo between the mounting
blocks and space it from the hatch. Use
a pencil to mark the mounting hole loca-
tions on the blocks.
6
Instruction Manual.
3.
Use drill bit in a pin vise to drill the
mouting holes in the blocks.
4.
Apply 2-3 drops of thin C/A to each of
the mounting holes. Allow the C/A to
cure without using accelerator.
5.
C/A glue
Use dental loss or heatshrink tube to
secure the connection so they cannot be-
come unplugged.
6.
1.5mm