Seagull Models Focke-Wulf Fw 190 Assembly Manual page 20

Focke- Wulf FW190
5.
With the muffler, needle valve, and spark/
glow plug removed from the engine, slide the
cowl in place over the engine. Temporarily in-
stall the propeller and spinner in order to find
the exact location of the cowl. Whensatisfied
with the cowl placement, secure the cowl to
the fuselage using masking tape.
6.
Install the muffler and muffler extension
onto the engine and make the cutout in
the cowl for muffler clearance. Connect
the fuel and pressure lines to the carbu-
retor, muffler and fuel filler valve. Secure
the cowl to fuse lage using the M3x10mm
socket head screws.
7.
20
Instruction Manual.
8.
ELECTRIC POWER CONVERSION
Locate the items neccessary to install
the electric power conversion included
with your model.
1.
Locate the laser cut engine mounting
template. Align mounting template to
front of firewall.
2.
Use a 1/4 bit to drill the engine mounting
holes. Remove mounting template from
fie wall. Firewall shown with mounting
holes drilled ready for engine mounting.