Fuel Tank Installation - Seagull Models Focke-Wulf Fw 190 Assembly Manual

Focke- Wulf FW190
When satisied with the alignment of the
stopper assembly tighten the 3 x 20mm ma-
chine screw until the rubber stopper expands
and seals the tank opening. Do not overtight-
en the assembly as this could cause the tank
to split.

FUEL TANK INSTALLATION

1.
You should mark which tube is the vent
and which is the fuel pickup when you attach
fuel tubing to the tubes in the stopper. Once
the tank is installed inside the fuselage, it may
be diicult to determine which is which.
2.
3.
16
Instruction Manual.
4.
5.
6.
7.
Epoxy