Control Throws - Seagull Models Focke-Wulf Fw 190 Assembly Manual

Focke- Wulf FW190
* If possible, irst attempt to balance the
model by changing the position of the
receiver battery and receiver. If you are
unable to obtain good balance by doing
so, then it will be necessary to add weight
to the nose or tail to achieve the proper
balance point.
With the wings attached to the fuselage,
all parts of the model installed ( ready
to ly), and empty fuel tanks, hold the
model at the marked balance point with
the stabilizer level.
Lit the model. If the tail drops when
you lit, the model is "tail heavy" and you
must add weight* to the nose. If the nose
drops, it is "nose heavy" and you must
add weight* to the tail to balance.
1.
34
155mm
Instruction Manual.

CONTROL THROWS

Ailerons:
High Rate :
Up : 15 mm
Down : 15 mm
Low Rate :
Up : 12 mm
Down : 12 mm
Elevator:
High Rate :
Up : 20 mm
Down : 20 mm
Low Rate :
Up : 15 mm
Down : 15 mm
Rudder:
High Rate :
Right : 25 mm
Let : 25 mm
Low Rate :
Right : 20 mm
Let : 20 mm
Flap:
Mid : 50mm
Full : 60mm