Orban OPTIMOD 6200 Operating Manual page 88

Digital audio processor
Table of Contents

Advertisement

3-8
OPERATION
including the source presets from which they were taken and the nominal
setting of each preset.
Many of the presets come in several "flavors," like "dense," "medium," and "open."
These refer to the density produced by the processing. "Open" uses a slow multi-band
release time "Medium" uses a medium-slow release, and "Dense" uses medium-fast. A
fast release is only used in the
Important! These presets are only suggestions. Try using the LESS-MORE
control to trade off loudness against processing artifacts and side effects.
Once you have used
Do not be afraid to experiment with presets other than the ones named for your format if
you think these other presets have a more appropriate sound. Also, if you want to fine-
tune the frequency balance of the programming, feel free to enter
make small changes to the BASS, MID EQ, and HF EQ controls. Remember to do this
after you have decided on a
ited a preset using
FULL CONTROL
preset.
Of course,
to go back to it. There is no way you can erase or otherwise damage the Fac-
tory Presets. So feel free to experiment.
NEWS/TALK
and
, save your edited preset as a User Preset.
LESS-MORE
setting that's right for you. Once you have ed-
LESS-MORE
,
LESS MORE
is still available for the unedited preset if you want
LESS-MORE
SPORTS
presets.
FULL CONTROL
is no longer available for that edited
ORBAN Model 6200
LESS-MORE
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optimod 6200s

Table of Contents