The Multi-Band Structure's Full Setup Controls - Orban OPTIMOD 6200 Operating Manual

Digital audio processor
Table of Contents

Advertisement

3-28
OPERATION

The Multi-Band Structure's Full Setup Controls

The table shows a summary of the Multi-Band controls:
MULTI-BAND FULL CONTROL
Parameter Labels
Units
AGC
AGC DRIVE
AGC REL
AGC B CPL
BASS CLIP
GATE THR
MB DRIVE
MB REL
B2>B1 CPL
B3>B4 CPL
B4>B5 CPL
B5 THR
DWNEXP THR
FINAL LIMT
LESS-MORE
PARENT PRESET
These controls are explained in detail below.
Each Multi-Band Factory Preset has a
by altering the amount of processing.
processing controls to optimize the trade-offs between unwanted side effects.
If you wish, you may adjust the
start with
LESS-MORE
FULL CONTROL
parameters using the Full Control screen, and save those edits to a User
Preset.
AGC ON/OFF control activates or defeats the slow AGC prior to the multi-band com-
pressor.
AGC DRIVE control adjusts signal level going into the slow AGC, and therefore deter-
mines the amount of gain reduction in the AGC. This also adjusts the "idle gain" — the
amount of gain reduction in the AGC section when the structure is gated. (It gates when-
ever the input level to the structure is below the threshold of gating.)
The total amount of gain reduction in the Multi-Band structure is the sum of the gain
reduction in the AGC and the gain reduction in the multi-band compressor. The total
system gain reduction determines how much the loudness of quiet passages will be in-
creased (and, therefore, how consistent overall loudness will be). It is determined by the
Default
---
on
dB
(per L/M tables)
dB/S
(per L/M tables)
%
(per L/M tables)
dB
(per L/M tables)
dB
(per L/M tables)
dB
(per L/M tables)
---
(per L/M tables)
%
(per L/M tables)
%
(per L/M tables)
%
(per L/M tables)
dB
(per L/M tables)
dB
(per preset)
dB
(per L/M tables)
---
(per preset)
---
(per preset)
Table 3-5: Multi-Band Controls
LESS-MORE
LESS-MORE
FULL CONTROL
to get as close to your desired sound as possible. Then edit the
ORBAN Model 6200
Range (CCW to CW)
off, on
−10 ... +25
0.5, 1.0, 1.5, 2 ... 20
0 ... 100
−6.00 ... 0.00
off, −44 ... −15
0 ... 25
slow, mslow, mfast, fast
0 ... 100
0 ... 100
0 ... 100
−16 ... 0
off, −6 ... +12
0.00 ... 6.00
(read-only)
(read-only)
control that adjusts on-air loudness
simultaneously adjusts all of the
parameters to your own taste. Always
Step
---
1
1
5
0.25
1
1
---
5
5
5
0.3
0.5
0.25
---
---

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optimod 6200s

Table of Contents