Setting Menu Of System Status Setting; Register Plc Unit - Omron CS Series Operator's Manual

System Status Setting Window

3-7-2 Setting Menu of System Status Setting

3-7-3 Register PLC Unit

60
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Selecting the [Settings] button in the [System Status Setting] window will dis-
play the [Settings] menu. The [Settings] menu sets operation environment for
the CX-Simulator. The [Settings] menu provides the following eight items to
set various operation environments.
Name
PLC Selection
Register PLC Unit
Network Communica-
tions Setting
Serial Communications
Setting
UM Setting
PLC Clock Setting
PLC Operation Setting
PLC Initializing
Note Changing the node address of the communications unit in the [Network
Communications Setting] will restart the Ladder Engine. Restarting the Ladder
Engine will clear the I/O memory areas according to the PLC Setup and read
the Autoexec file automatically.
The unit selection performed in the [PLC Setup] wizard can be done again in
the [Register PLC Unit] window.
1. Selecting [Register PLC Unit] in the [System Status Setting]|[Settings]
1,2,3...
menu will display the [Register PLC Unit] window.
Function
Create a new PLC (the PLC Setting wizard) and
select an existing PLC. Refer to 3-5 Creating a New
PLC for the details.
Set the Unit for mounting to the PLC.
Set for the Network Communications Unit. Refer to
6-2 Network Communications Settings for details.
Set for the Serial communications Unit. Refer to 5-2
Serial Communications Settings for details.
Change the UM setting.
Set the cycle time mode, the interval for continuous
run, and others.
Set WDT Disable, DIP switches, and others.
Initialize the IO memory of the PLC.
Section 3-7