Omron CS Series Operator's Manual page 100

Debug Console Window
[Data Replay]
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Start the [Data Replay Settings] window and then Data Replay Tool using the
set file.
Replay file Input the file name to be replayed by Data Replay
·
Tool. The Command Log file (.flg), the data trace
data file (.cdt), and the data replay file (.csv) can be
replayed.
Output file Input the file name to output the monitor data corre-
·
sponding to the replay data to. The format of the
output file will be that of the data replay file(.csv).
Output template If the data to be monitored into the output file is set to
·
the other data replay file, the file can be specified as
the output template file.
Browse Select the name of the replay file, output file, and
·
output template file specifying the destination for
browsing.
FINS Address Set the destination FINS address for the data replay.
·
The FINS address for the Ladder Engine is set in
default.
Synchronous replay Replay synchronously.
·
OK Start the Data Replay Tool with the present settings.
·
Cancel Discard the present settings and exit the window.
·
Section 3-9
85