Omron CS Series Operator's Manual page 260

How to Use Data Trace Recording Tool
Explanation for Each Part of the Window
Names and Functions
Target PLC to
Trace
Sampling
interval
Trace Data
Record file
Trace Status
Write settings
button
Read settings
button
Item
Target PLC to
Trace
Sampling Area
Sampling interval
Interval
Per cycle
Abort Value
Type
Samples
Trace
elapsed
Unit
Trace Data Record
File
Browse
Options settings Set options regarding trace data saving.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Specify the FINS address for the PLC where data tracing will
be performed.
Only network/node address can be input.
Register addresses where bits and words are sampled.
[Edit]: Edit bit/word addresses in the Sampling Address Set-
ting window.
Set at least one to either of bits or words within the range on
the right.
Set the sampling conditions with the radio button.
Set the sampling interval as "fixed" and enter the interval in the
text box (unit: ms).
Trace per cycle of the ladder program.
Specify the value for exiting the data tracing.
Specify either of after getting specified number of samples or
after specified time elapsed.
Specify the value for exiting the data tracing.
Specify the time for tracing.
Specify the unit for the time above: either of second, minute, or
hour.
Specify the file name for saving the sampling data: either in a
relative path or in an absolute path.
Display the File Name Setting dialog.
Description
Appendix
Sampling Area
Abort Value
Options button
Start button
Exit button
Limit of values
Network: 0 to 127
Node: 1 to 126
Unit: 0(fixed)
Number of bits: 0 to 31
Number of words: 0 to 6
10 to 2550
1 to 65535
1 to 65535
A network name can not
be specified.
245