Omron CS Series Operator's Manual page 5

About Upgrades:
Version 1.1
The following functions have been added to the CX-Simulator with the upgrade from Version 1.0 to
Version 1.1.
Actual Serial Communications Possible
NT Link (1:N Mode) Possible
Multipoint Data Collection Tool Added
WindowsMe/2000 Supported
Serial Number Entry on Installing Added
Version 1.2
The following functions have been added to the CX-Simulator with the upgrade from Version 1.1 to
Version 1.2.
New PLCs Supported
Functionality Improved
vi
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
In Ver.1.0, the contents of messages sent by serial communications instruc-
tions are displayed on the computer screen. In Ver.1.1, actual serial commu-
nications to an external serial communications device connected to a COM
port on the computer are also possible.
In Ver.1.1, communications with OMRON's Programmable Terminal (PT)
connected to a COM port on the computer via NT Link are possible.
Time-series I/O memory data acquired from the actual PLC can be saved as
a Data Replay File (CSV format). Unlike Data Trace, data can not be ac-
quired every cycle. However, data of more than 50 words can be acquired.
Simulation is newly supported for the following PLCs.
Series
CS CS1H-CPU67H/66H/65H/64H/63H
CS1G-CPU45H/44H/43H/42H
CJ CJ1H-CPU66H/65H
CJ1G-CPU45H/44H/43H/42H
CJ1G-CPU45/44
The following functions have been improved so that the same operation as
that performed by the actual PLC is performed by the CX-Simulator. (There
were some differences in operation with version 1.1.)
Processing when using index registers for automatic incrementing or
•
decrementing with sequence output instructions.
Processing the current EM bank is changed during execution of the lad-
•
der program.
Break processing for nested FOR-NEXT loops.
•
Processing for decrementing counters in certain ladder program struc-
•
tures.
CPU Unit model numbers