Omron CS Series Operator's Manual page 222

I/O Memory Allocation
Address
Words Bits
A295 A29511
A29512
A29513
A29514
A29515
A298 All
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Name
No END ON when there isn't an
Error Flag END(001) instruction in each
program within a task.
CPU Unit operation will stop and
the ERR/ALM indicator will light
when this flag goes ON.
(The task number where the
error occurred will be stored in
A294 and the program address
will be stored in A298 and A299.)
Task Error ON when a task error has oc-
Flag curred. The following conditions
generate a task error.
There isn't even one regular task
that is executable (started).
There isn't a program allocated
·
to the task.
(The task number where the
·
error occurred will be stored in
A294 and the program address
will be stored in A298 and A299.)
Differentia- The allowed value for Differentia-
tion Over- tion Flags which correspond to
flow Error differentiation instructions has
Flag been exceeded. CPU Unit op-
eration will stop and the
ERR/ALM indicator will light
when this flag goes ON.
(The task number where the
error occurred will be stored in
A294 and the program address
will be stored in A298 and A299.)
Illegal In- ON when a program that cannot
struction be executed has been stored.
Error Flag CPU Unit operation will stop and
the ERR/ALM indicator will light
when this flag goes ON.
(The task number where the
error occurred will be stored in
A294 and the program address
will be stored in A298 and A299.)
UM Over- ON when the last address in UM
flow Error (User Memory) has been ex-
Flag ceeded. CPU Unit operation will
stop and the ERR/ALM indicator
will light when this flag goes ON.
Program These words contain the 8-digit
Address binary program address of the
Where instruction where program exe-
Program
cution was stopped due to a pro-
Stopped gram error.
(Rightmost
4 digits)
CS/CJ-series PLC
Function
1: No END
0: Normal
condition
1: Error
0: Normal
1: Error
0: Normal
1: Error
0: Normal
1: Error
0: Normal
Right 4
digits of the
program
address
Section 9-3
CX-Simulator
Settings Function
Same as
CS/CJ-series
PLC.
Same as
CS/CJ-series
PLC.
Same as
CS/CJ-series
PLC.
Same as
CS/CJ-series
PLC.
Same as
CS/CJ-series
PLC.
Same as
CS/CJ-series
PLC.
Settings
207