Omron CS Series Operator's Manual page 110

Debug Console Window
Register IO Break Condition Window
Bit condition or word
condition select
[OK] button
Available Area Type and
Address Range
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
The Register IO Break Condition window sets conditions to be registered to
AND LIST or OR LIST in the I/O Break Settings window.
Name
Bit condition or word condi-
tion select
Bit condition area type
Bit condition address
Bit condition value
Word condition area type
Word condition address
Word condition operator
Word condition value
[OK] button
[Cancel] button
Bit Condition
Area Name
CIO Area IO
Work Area W
Holding Area H
Auxiliary Area A
Select bit condition or word condition as the
Conditional Equation to be input.
(See the table below.)
(See the table below.)
Select from ON, OFF, or NOT (value change).
(See the table below.)
(See the table below.)
Select from =, <=, >=, <>, <, >, or NOT (value
change).
Input the value to be compared in binary (0000
to FFFF).
Register the present I/O break condition and exit
the window.
Exit the window without setting the present con-
dition.
Area Type
0.00 to 6143.15
0.00 to 511.15
0.00 to 511.15
0.00 to 959.15
Section 3-9
Bit condition area
type
Bit condition
address
Bit condition
value
Word condition
area type
Word condition
address
Word condition
value
Word condition
operator
[Cancel] button
Function
Address Range
95