1E2-4 M161 ENGINE ELECTRICAL
ALTERNATOR
Preceding Work : Removal of the drivebelt
Removal & Installation Procedure
1. Disconnect the negative battery terminal.
2. Unscrew the nut and disconnect the terminal (1).
Installation Notice
Tightening Torque
3. Unscrew the nut and disconnect the terminal (2).
Installation Notice
Tightening Torque
4. Unscrew the combination bolt (3).
Installation Notice
Tightening Torque
5. Remove the alternator.
6. Installation should follow the removal procedure in the
reverse order.
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
14 - 18 Nm
4 - 5 Nm
42 - 50 Nm
1
Terminal (B+)
2
Terminal (D+)
3
Combination Bolt
4
Alternator