3C-6 PROPELLER SHAFT
Inspection Procedure
1. Visual check.
Check the disassembled parts for wear or crack.
Replace them if necessary.
2. Spider outer diameter (mm).
Standard
16.668
3. Clearance between the spider and bearing.
Standard
0.03 - 0.098 mm
4. Propeller shaft runout
Using a dial indicator, measure propeller shaft runout by
l
turning the shaft. If runout exceeds limit, replace the
propeller shaft or correct it using a press.
Limit
Limit
16.647
Limit
0.25 mm
0.4 mm