6. Measure backlash of the drive pinion and ring gear.
Specified Value
7. Install the axle housing cover.
Tightening Torque
8. Assemble the parts of the front axle shaft and housing
mounting bracket.
Notice
Apply grease to the oil seal rib.
9. Align the axle shaft and differential carrier spline and insert
the axle shaft. Assemble the axle housing mounting bracket
to the axle housing.
Tightening Torque
0.13 - 0.20 mm
39 - 46 Nm
55 - 65 Nm
FRONT DRIVE AXLE 3A-21