3D-14 REAR DRIVE AXLE
4. Measure backlash of the side gear and pinion gear.
Specified Value
5. Install the differential carrier assembly into the axle housing.
Tightening Torque of The
Bearing Cap Bolts
Notice
Be careful no to change the caps. Be sure to keep the original
position of the caps.
6. Measure backlash of the drive pinion and ring gear.
Specified Value
7. Install the axle housing cover.
Tightening Torque
0 - 0.05 mm
48 - 69 Nm
0.13 - 0.20 mm
39 - 46 Nm