SSANGYONG Musso Sports N100 2003 Manual page 325

1B1-62 M162 ENGINE MECHANICAL
4. Turn the intake camshaft adjuster to the direction of camshaft
rotation by hard until it stops and then install the chain.
Notice
l Make sure that the camshaft sprocket and timing chain
are aligned with marks.
l Intake camshaft adjuster should be in retarded position.
5. Install the chain on the exhaust sprocket and tighten the
sprocket bolts.
Notice
Tightening Torque
l Make sure that the camshaft sprocket and timing chain
are aligned with marks.
l Replace the sprocket bolt with new one.
6. Install the chain tensioner and tighten it as specified.
Notice
Tightening Torque
7. Rotate the crankshaft 2 revolutions and check followings:
- TDC of no. 1 cylinder : OT
- Alignment between camshaft adjustment hole and
cylinder head surface.
- Alignments between timing chain and sprocket marks.
Notice
l Turn the crankshaft in the direction of engine rotation.
l Read just if not aligned.
1st step 18 - 22 Nm
2nd step 90° ± 5°
(1) 40 Nm
(2) 72 - 88 Nm