UNIT REPAIR
FRONT DISC BRAKE
Inspection Procedure
1. Clean all components and visually check the followings.
Check the cylinder and piston for wear, rust or damage.
l
Check the caliper body and guide pin for wear, damage
l
or crank.
Check the pads for uneven wear or oiliness.
l
Check the boots for damage or tear.
l
2. Measure caliper housing inner diameter.
Item
With PBR
With MANDO
3. Measure pad thickness.
Standard
10 mm
Notice
Always change the all pads on one wheel at a time.
4. Measure rotor disc thickness.
Standard
24 mm
5. Check the rotor disc for score or runout.
Standard
Wear Limit
φ 60.4 mm
φ 61.4 mm
φ 60.0 mm
φ 61.0 mm
Wear Limit
2.0 mm
Wear Limit
22 mm
FRONT DISC BRAKES 4D-5