Machining Of Flywheel - SSANGYONG Musso Sports N100 2003 Manual

MACHINING OF FLYWHEEL

1 Flywheel
Machining of Flywheel
Notice
Flywheels which have scorch marks, scoring or cracks in
the clutch surface should be machined by grinding or
precision-turning. If the scores or cracks are severe than
permissible specifications, replace the flywheel.
Distance 'a'
Distance 'b'
Max. axial runout
When machining the clutch surface 'A', the mounting
l
surface (B) for the clutch pressure plate should also be
machined in accordance with 'A' to keep the distance 'a'.
Do not machine under 'b' value.
l
When machining, fix the flywheel exactly not to exceed the
l
standard runout.
19.3 - 19.5 mm
16.6 mm
New
15.6 mm
Repair up to
0.05 mm
OM600 ENGINE MECHANICAL 1B3-97
OM662LA OM662LA