SSANGYONG Musso Sports N100 2003 Manual page 656

Removal Procedure
1. Remove combustion residues from the cylinder bores.
2. Remove the connecting rod bolts (12) and then remove
the connecting rod bearing caps(11).
3. Remove the connecting rod bearing shells (9, 10).
Notice
Be careful not mix the bearing caps and shells each other.
4. Remove the piston (6) and connecting rod (8).
5. Remove the snap ring (4) and pull out the piston pin (5).
6. Separate the piston and connecting rod.
OM600 ENGINE MECHANICAL 1B3-165