SSANGYONG Musso Sports N100 2003 Manual page 1074

4F-18 ANTILOCK BRAKE SYSTEM
Defect Code
Acceleration Sensor Signal (Signal)
43
Application
Description
Check connection between connectors.
l
Check relevant wires for open or short.
l
(When connector is removed)
Check and replace the acceleration sensor.
l
Replace the ECU.
l
Check voltage between ECU side ground (ABD:No.1,
l
ABS:No.15 pin) and acceleration sensor side ground
(ABD:No.1, ABS:No.15 pin / ECU side ABD:No.39,
ABS:No.30 pin)
(When connector is installed and power is applied)
- Voltage : less than 0.25 V
Check voltage among related terminals.
l
(When connector is installed and power is applied)
- Voltage between ECU (ABD:No.51, ABS:No.10
pin and ABD:No39, ABS:No.30) pin
: 4.75 - 5.25 V
- Signal voltage between ECU (ABD:No.51,
ABS:No.10 pin and ABD:No39, ABS:No.30) pin
: 1.95 V - 3.45 V
(Measure it by laying acceleration sensor horizon
tally and without external force)