SSANGYONG Musso Sports N100 2003 Manual page 1006

5. Universal joint starting torque.
Starting Torque
6. Possible cause of vibration.
Drift away of balance weights.
l
Excessive runout of the propeller shaft.
l
Using normal bolts.
l
Excessive wear of the universal joint.
l
Sticks in sleeve joint.
l
Drive angle changes in universal joints or cross causes
l
vibration and can be detected around 60~100 km/h.
Installation Procedure
Clean the disassembled parts and replace them if damaged.
1. Align the alignment marks of the yoke and assemble the
spider, bearing and snap ring.
2. Apply grease to the inner of the bearing cap of the needle
roller bearing and assemble the needle roller.
Grease
3 - 8 kg cm
l
EP #2
PROPELLER SHAFT 3C-7