Coolant Temperature Sensor - SSANGYONG Musso Sports N100 2003 Manual

COOLANT TEMPERATURE SENSOR

1 Artificial Resin Housing
2 Metal Housing
3 NTC (negative temperature coefficient) Resistor
Removal & Installation Procedure
1. Remove the pressure by opening the pressure cap in the
coolant subtank.
2. Disconnect the connector and remove the coolant
temperature sensor.
Installation Notice
Tightening Torque
Replace the seals with new one.
3. Installation should follow the removal procedure in the
reverse order.
4. Check for leaks at each connections after starting the engine.
4 Connector
5 Coolant Temperature Sensor
18 - 22 Nm
M162 ENGINE CONTROLS 1F1-75