8. Remove the chain tensioner (17).
Installation Notice
Tightening Torque
Notice
Replace the seal (16).
9. Pull out the 12-sided stretch bolt (14) and washer and
remove the camshaft sprocket (12).
10. Pull out the bolt (11) and washer (10).
Notice
Be careful that the bolt is left-hand thread.
Installation Notice
Tightening Torque
11. Using special tool (24, 25), remove the locking pin (8).
80 Nm
46 Nm
Sliding Hammer 116 589 20 33 00
Threaded Bolt 116 589 02 34 00
OM600 ENGINE CONTROLS 1F3-33