Chapter 27: Removing The Palm-Rest And Keyboard Assembly; Prerequisites; Procedure - Dell Inspiron 11 3000 Service Manual

Removing the palm-rest and keyboard
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Follow the procedure from step 1 to step 6 in
2. Remove the battery.
3. Remove the heat sink.
4. Remove the memory module.
5. Follow the procedure from step 1 to step 2 in
6. Remove the power-adapter
7. Remove the wireless card.
8. Remove the coin-cell battery.
9. Remove the speaker.
10. Remove the display assembly.
11. Remove the system board.
Procedure
After performing the steps in prerequisites we are left with the palm-rest and keyboard assembly.
52 Removing the palm-rest and keyboard assembly
computer. After working inside your computer, follow the instructions in
"Removing the base
"Removing the hard
port.
cover".
drive".
27
assembly
After
www.dell.com/