NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Follow the procedure from step 1 to step 6 in
2. Remove the battery.
3. Remove the
wireless
card.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
Procedure
1. Remove the four screws (M2.5x2.5) that secure the display hinges to the display back-cover and antenna assembly.
2. Lift the display hinges off the display back-cover and antenna assembly.
Figure 34. Removing the hinges
a. back-cover and antenna assembly
b. M2.5x2.5 screws (4)
c. display hinges (2)
58
Removing the display hinges
Removing the display hinges
computer. After working inside your computer, follow the instructions in
"Removing the base
cover".
31
After
www.dell.com/