NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Follow the procedure from step 1 to step 6 in
2. Remove the battery.
3. Remove the
wireless
card.
4. Remove the
display
hinges.
5. Remove the
display
bezel.
6. Remove the
display
panel.
Procedure
CAUTION:
Place the display-panel assembly on a soft and clean surface to avoid scratching the display.
1. Using a plastic scribe, gently pry the camera from the display back-cover and antenna assembly.
2. Disconnect the camera cable from the camera.
Removing the camera
computer. After working inside your computer, follow the instructions in
"Removing the base
cover".
35
After
www.dell.com/
Removing the camera
63