NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Follow the procedure from step 1 to step 6 in
2. Remove the battery.
3. Follow the step 1 procedure in
Procedure
1. Disconnect the speaker cable from the system board.
2. Remove the coin-cell battery cable from the routing guide on the speaker.
3. Release the rubber stubs on the speaker and lift the speaker from the palm-rest and keyboard assembly.
Figure 23. Removing the speaker
1. system board
computer. After working inside your computer, follow the instructions in
"Removing the base
"Removing the I/O
board".
Removing the speaker
cover".
2. speaker cable
21
After
www.dell.com/
Removing the speaker
41