Chapter 16: Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell Inspiron 11 3000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2. Align the screw hole on the power-adapter port with the screw hole on the palm-rest and keyboard assembly.
3. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
Post-requisites
1. Replace the battery.
2. Follow the procedure from step 2 to step 5 in
Replacing the power-adapter port
computer. After working inside your computer, follow the instructions in
"Replacing the base cover".
Replacing the power-adapter port
16
After
www.dell.com/
33