NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Adhere the coin-cell battery to the palm-rest and keyboard assembly.
2. Route the coin-cell battery cable through the routing guide on the speaker.
3. Connect the coin-cell battery cable to the system board.
Post-requisites
1. Replace the
wireless
card.
2. Follow the step 4 procedure in
3. Replace the battery.
4. Follow the procedure from step 2 to step 5 in
40
Replacing the coin-cell battery
Replacing the coin-cell battery
computer. After working inside your computer, follow the instructions in
"Replacing the I/O
board".
"Replacing the base
cover".
20
After
www.dell.com/