NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Follow the procedure from step 1 to step 6 in
2. Remove the battery.
3. Remove the
wireless
card.
4. Remove the
display
assembly.
Procedure
1. Press the hinge caps to release them from the display hinges.
2. Lift the hinge caps from the display hinges.
Figure 32. Removing hinge caps
a. hinge caps (2)
b. display hinges (2)
3. Using your finger tips gently pry and lift the display bezel off the display back-cover and antenna assembly.
Removing the display bezel
computer. After working inside your computer, follow the instructions in
"Removing the base
cover".
After
www.dell.com/
Removing the display bezel
29
55