Chapter 36: Replacing The Camera; Procedure; Post-Requisites - Dell Inspiron 11 3000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Adhere the display cable to the display back-cover and antenna assembly.
2. Connect the camera cable to the camera.
3. Using the alignment post place the camera module on the display back-cover and antenna assembly.
4. Adhere the camera to the display back-cover and antenna assembly and snap the camera into place.
Post-requisites
1. Replace the display panel.
2. Replace the display bezel.
3. Replace the display hinges.
4. Replace the wireless card.
5. Replace the battery.
6. Follow the procedure from step 2 to step 5 in
Replacing the camera
computer. After working inside your computer, follow the instructions in
"Replacing the base cover".
36
After
www.dell.com/
Replacing the camera 65