Replacing the palm-rest and keyboard
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
Place the palm-rest and keyboard assembly on a flat surface with the keyboard facing down.
Post-requisites
1. Replace the
system
board.
2. Replace the
display
assembly.
3. Replace the speaker.
4. Replace the
coin-cell
battery.
5. Replace the
wireless
card.
6. Replace the
power-adapter
7. Follow the procedure from step 3 to step 5 in
8. Replace the
memory
module.
9. Replace the
heat sink
.
10. Replace the battery.
11. Follow the procedure from step 2 to step 5 in
54
Replacing the palm-rest and keyboard assembly
computer. After working inside your computer, follow the instructions in
port.
"Replacing the hard
"Replacing the base
drive".
cover".
28
assembly
After
www.dell.com/