NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Follow the procedure from step 1 to step 6 in
2. Remove the battery.
Procedure
1. Disconnect the power-adapter port cable from the system board.
2. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3. Lift the power-adapter port with its cable, off the palm-rest and keyboard assembly.
Figure 19. Removing the power-adapter port
a. M2x3 screw
b. power-adapter port cable
c. palm-rest and keyboard assembly
32
Removing the power-adapter port
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
"Removing the base
cover".
15
After
www.dell.com/