Table of Contents
Advertisement
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
coin-cell
5. Remove the
memory
modules.
6. Remove the
wireless
card.
7. Remove the
M.2 2230 solid-state drive
8. Remove the
I/O
board.
9. Remove the speakers.
10. Remove the
heat
sink.
11. Remove the fan.
12. Remove the touchpad.
13. Remove the
power-adapter
14. Remove the
power button
15. Remove the
display
assembly.
16. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
About this task
NOTE:
The wireless-antenna cable and wireless antenna are part of the palm-rest and keyboard assembly.
The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
After working inside your
Before working inside your
battery.
or
M.2 2280 solid-state
port.
or
power button with fingerprint
computer.
computer.
drive, whichever applicable.
reader.
Removing and installing components
59
Advertisement
Table of Contents
