NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Slide the display cable into the connector on the display panel and close the latch to secure the cable.
2. Adhere the adhesive tape to the display cable.
3. Align the screw holes on the display panel with the screw holes on the display back-cover and antenna assembly.
4. Replace the four screws (M1.2x2) that secure the display panel to the display back-cover and antenna assembly.
Post-requisites
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the battery.
5. Follow the procedure from step 2 to step 5 in
62
Replacing the display panel
Replacing the display panel
computer. After working inside your computer, follow the instructions in
"Replacing the base
cover".
34
After
www.dell.com/