NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
Procedure
1. Close the display and turn the computer over.
2. Using a plastic scribe, remove the screw cap from the base-cover assembly.
Figure 1. Removing the screw cap
a. screw cap
b. plastic scribe
3. Remove the nine screws (M2.5x6) that secure the base-cover assembly to the palm-rest and keyboard assembly.
10
Removing the base cover
Removing the base cover
computer. After working inside your computer, follow the instructions in
3
After
www.dell.com/